Wiring loom Multi-Mount device

Set includes TAIO EVO-1 Synthetic Rope and Aluminum Hawse.With the TAIO (Taubenreuther-All-In-One) EVO-1 we launch a new generation of winching ropes with more flexibility and strength. Because of the already spliced in soft-shackle(non metal construction), you are able to rigging and winching with a minimum of injury potential than ever before. Also the lower noise level and less scratchers in your vehicle paintwork argues for the TAIO. Some offroad fans mourn after the old days when a 4x4 was raw and martial, but today's 4WD cars have a complex Design and we have to assimilate with our rope, that is nearly complete hidden without a hook is interrupt the shape. PROS: feather-light and flexible with a huge breaking load (9000 daN) made of Vectran® heat-resisting up to 200°C UV resistant XTR coating lower noise level and a minimum of injury potential(Non-Metal-Construction) no hook, no thimble that can scratch the vehicle paintwork signal colour red for easy recover and all works in bad lighting conditions black protective tubing that also covers the whole last layer for a subtly look deliverd in a attractive netbag

Power lead 6,00 m with 175A plug and cover, power interrupt kit

The M8000, with its 4.8-hp Series Wound motor and 3-stage planetary geartrain, packs 8,000 lbs. of pulling power to get the job done Rated Line Pull: 8000 lbs. (3630 kgs.) single-line Motor: 12V 4.8 hp, 24V 2.1 hp, Series WoundTM Remote Control: Remote switch, 12' (3.7m) lead Geartrain: 3-Stage Planetary Gear Ratio: 216:1 Lubrication: Aeroshell #17 Clutch (freespooling): Sliding Ring Gear Brake: Automatic Direct Drive Cone Drum Diameter/Length: 2.5 Weight: 74 lbs. (34 kgs.) Wire Rope: 80', 5/16

Hole patterns:254x114mm, 108x114mm & 167x76mmSuits WARN Midrange winches, ZEON, TABOR, VR EVO up to 3.600 Kg, WARN 5000DC, VRX and AXONSet included: 1x cable set for winch 32,5 x 65cm 1x cable set for vehicle 220cm 1x cover for plug 1x safety bolt with cotter pin 1x switch box holder Optional items for special applications (not included in the scope of delivery): Optional for WARN winches with integrated control box (e.g. ZEON): 1x 1-244430 Handles for Multimount Optional for WARN Midrange winches with separate control box: 1x 1-263752 Multimount Handle For small winches (AXON, VRX) 2x 1-22681 Aux Elect. Connector small, 50 Amp. 1x 1-60917 Terminal Dust Cover for connector 1x 1-63063 Hitch pin incl. Splint 1x 16-0302 Mounting clip, socket

We recommend the WARN M8000 1-265024 in conjunction with the contactorbox mounting bracket 16-06370 and Multimount winch carrier kit 1-263790, because only in this combination the winch can also be used at the rear with the tailgate fully open.The carrier set then includes the bolt, splint and the cover for the square receiver.In addition, this separately ordered set also includes the cable set 1-35290 for the front, which is 1x 32,5cm and 1x 65cm on the winch side and 2x 220cm long on the vehicle side. The typical 2 pin Anderson connectors are already attached and the cable ends are provided with cable lugs.The mounting kit itself comes with a fuse kit, which should be integrated into the positive cable.Appropriate cable lengths for the rear and other fuses must be determined depending on the installation situation itself.Suitable plugs and cables can be found under the item accessories.