CargoGlide 2.0, 75% Extension, 272 Kg capactiy, 1415x615mm, Midsize

Please note:Does not fit in prior generation DECKED Drawer Systems

For assembling Muli-Rack in conjunction with Pioneer Platform 2 Adapterkits required for DoubleCab models and 3 Adapterkits for Xtracab Models.

The Rhino-Rack Reconn-Deck Bar is a strong and durable crossbar. It has integrated channels on all four sides, allowing for mounting of accessories. These are available as a single item, and are available in three different predefined lengths to suit a range of vehicles.The scope of delivery includes one Reconn-Deck Bar in lenght 1260mm.Futher lenghts are also available: 1500mm (50-10RDB150) 1650mm (50-10RDB165) Features: Lenght: 1260mm Integrated channels on all 4 sides for mounting of accessories Made from powder coated aluminium providing the ultimate in corrosion resistance Removable end caps for easy installation of accessories. Secure core locks included Compatible with most Rhino-Rack Pioneer and crossbar roof rack accessories Option to run 3 crossbars on selected vehicles with longer tubs Underside channels can be accessed to mount recovery tracks, shovel or other accessories Up to 150kg/330lb on-road and off-road and off-road load rating. Up to 375kg/826lb static load rating.**To get your cargo capacity - subtractthe system weight from the system loadlimit. Manufacturers load limits apply. Please note:the length specification refers to the aluminium bar. The length of end caps or connectors musst be added to each side.

Not suitable for Ford Ranger PVEH HybridPlease note: To install a CargoGlide bedslide, you need the following mounting bracket:CGA0110YCGBBLKFeaturing a highly adaptable single drawer with a massive 180 kg capacity, DECKED midsize Drawer System combines weatherproof, lockable, ultra-secure storage with a 454 kg payload-rated, D-ring tie-down equipped deck for unparalleled versatility. Complete RedesignSeeking to maximize storage capacity and eliminate wasted space in the bed, DECKED created one Drawer to replace the two asymmetrical drawers previously offered. Reducing the system payload requirement from 900 kg to 454 kg more accurately reflects the use cases and capacities of modern mid-size trucks. It also enabled engineers to create the single Drawer with a 180 kg payload rating. Drawer spans from wheel well to wheel well and runs the full length of the bed. With 30% more drawer storage capacity than previous versions, midsize customers will now have more than enough space for their tools, camping gear, or bug-out essentials. This drawer can also be reconfigured into a big sliding tray by removing the drawer sides for better access and storage customization with DECKEDs line of D-co Cases.Added Cargo Tie-DownsThe mid-size Drawer System features six burly 180 kg load-rated steel-to-steel bed tie-down locations atop the deck, three on either side. Just as in the fullsize, cargo tie-downs are integrated into the outbound edge of the deck of the system using a D-ring tie down system. When not in use, these D-ring tie-downs lie flat, countersunk in the surface.Enhanced WeatherproofingJust as in the full-size update, increased protection from the outside environment has been realized by adding cabside and drawer-side closeout panels which wrap the drawers in a protective shield as well as a more effective drawer face seal against the elements. These additions vastly reduce the amount of air which can swirl around in the bed and possibly deposit dust or other airborne particulate matter into the drawer.Please Note:The manufacturer does not account for accessories in and on the loading area in the development. Also no original accessories such as lashing rails, style bars or load area protection! These accessories must be dismantled before the drawers assembly and can no longer be used.

The RSI Stow Away Table is mounted on the headliner of the hardtop interior and can be easily removed by a folding mechanism and stowed away while driving to save space.

Thread Size: M6

Fits the following vehicles: Ford Ranger Double Cab '23 on Ford Ranger Wildtrak Double Cab with roof rails '23 on Ford Ranger Raptor Double Cab 11/2022 on VW Amarok Double Cab with roof rails '23 on Built Rhino Tough and vigorously tested to meet the needs of any adventurer, the Rhino-Rack Backbone (50-11RFRB3) is the most highly anticipated fit for the new P703 Ford Ranger and VW Amarok. Paired with the Pioneer Platform (50-1262100), this stylish duo is compatible with all Ranger and Amarok variants. Functionally uncompromised, this combination utilises 100% of the vehicle's roof to maximise load and storage space, ready for any overlanding adventure. The 50-11RFRB3 Backbone requires no drilling, uses pre-existing factory roof mounting points and has concealed fixing for seamless transition between product and vehicle.This set consists of: Rhino Rack Pioneer NG platform aluminium, 1500 x 1240 mm, black (50-1262100) Rhino Rack "Backbone" Mounting kit (50-11RFRB3)Rhino Rack's strongest and most versatile roof rack ever, yet it still boasts up to a 60% reduction in drag, a 20% reduction in weight, and 25% more usable channels, enabling every inch of the platform to be ustilised for mounting accessories. Quieter and lighter than ever, the unique alloy components and scuff-resistant coating ensure there's no compromise in quality, allowing you load more than ever before without sacrificing your gear for adventure. With integrated capabilities, additional east/west mounting channels, and the most comprehensive ecosystem of accessories on the market, the Pioneer 6 Platform makes you the Pioneer of your adventure. Except for the outer C-Channels, the installation of accessories is only possible with Zwifloc Channel NutsFeatures & Data: Up to 60% reduction in drag from its predecessor Stronger alloys that maintain strength but reduce weight by 20% too No channel apertures make 100% of the platform usable for mounting accessories Improved performance with up to 25% more usable channels harder coating to reduce damage and scuffs East/West mounting channels for more mounting options than ever before Integrated wiring capabilities within all extrusions Detachable wind fairing inserts in leading-edge further enhance drag reduction

Please note:The TRED Pro Mounting Bracket is sold as a single unit. Depending on your fitting requirements you may need to purchase two units. Mounting Material for your Roofrack is not included.

OME leaf springs are offered in in different versions for most vehicles in order to meet the different requirements due to different engines and additional weights due to retrofitted accessories. However, it is not only the number of spring layers that is important, but also the material used, the thickness and the bending of the individual layers. In addition, layers can be removed or added to almost any leaf spring. Additional, individual fine tuning is possible by adding or removing polyurethane friction washers and spacers to increase or decrease the inherent friction of the spring.However, all OME leaf springs have the following characteristics: Flattened at the point of contact with the axle; for a clean contact and reduced stress on the spring and U-bolt Wedge- and trapezoidal-shaped ends of the spring layers; for better response and reduced risk of breakage at the highly stressed end tips Lubricatable friction washers, also improves response and noise Replaceable nylon slider bars on the guide brackets to reduce friction and noise All spring layers are shot-peened prior to assembly to reduce surface tension and densify material for longer life After assembly, all spring assemblies are "set" to full load and tested for their desired spring rate

Sutits following Leafsprings with with OME greasable shackles 3-426:3-EL102R, 3-EL103R, 3-EL104R, 3-EL126R 3-EL127R & 3-EL128R

CAUTION: Not compatible with CMS railsPlease note: To install a CargoGlide bedslide, you need the following mounting bracket:CGA0110YCGBBLKFeaturing a highly adaptable single drawer with a massive 180 kg capacity, DECKED midsize Drawer System combines weatherproof, lockable, ultra-secure storage with a 454 kg payload-rated, D-ring tie-down equipped deck for unparalleled versatility. Complete RedesignSeeking to maximize storage capacity and eliminate wasted space in the bed, DECKED created one Drawer to replace the two asymmetrical drawers previously offered. Reducing the system payload requirement from 900 kg to 454 kg more accurately reflects the use cases and capacities of modern mid-size trucks. It also enabled engineers to create the single Drawer with a 180 kg payload rating. Drawer spans from wheel well to wheel well and runs the full length of the bed. With 30% more drawer storage capacity than previous versions, midsize customers will now have more than enough space for their tools, camping gear, or bug-out essentials. This drawer can also be reconfigured into a big sliding tray by removing the drawer sides for better access and storage customization with DECKEDs line of D-co Cases.Added Cargo Tie-DownsThe mid-size Drawer System features six burly 180 kg load-rated steel-to-steel bed tie-down locations atop the deck, three on either side. Just as in the fullsize, cargo tie-downs are integrated into the outbound edge of the deck of the system using a D-ring tie down system. When not in use, these D-ring tie-downs lie flat, countersunk in the surface.Enhanced WeatherproofingJust as in the full-size update, increased protection from the outside environment has been realized by adding cabside and drawer-side closeout panels which wrap the drawers in a protective shield as well as a more effective drawer face seal against the elements. These additions vastly reduce the amount of air which can swirl around in the bed and possibly deposit dust or other airborne particulate matter into the drawer.Please Note:The manufacturer does not account for accessories in and on the loading area in the development. Also no original accessories such as lashing rails, style bars or load area protection! These accessories must be dismantled before the drawers assembly and can no longer be used.

Please note:Does not fit in prior generation DECKED Drawer SystemsIncludes removable dividers for custom organization.These six different cases are constructed using a mineral reinforced polymer which may prove to make them durable and rugged, tough enough to be run over by a truck and still function perfectly. Engineered to be IP 65 waterproof and dustproof, the D-co Case line is built with particular consideration to stand alone performance, in-drawer functionality, a system-based way of thinking that DECKED calls the D-co system, where everything is designed to work better to work better together. The Clutch Latch on the Sixer 16L and Halfrack 32L allows one hand via a mechanism which actuates two latches by squeezing the handle, popping the case open. A waterproof seal is achieved by simply slamming the lid shut, eliminating the common two-handed, multi step latches found in most cases in this category. Stable Stack is where the D-cosystem thinking stands out. Corresponding geometry between the bases and lids of the cases as well as a coordinated form factor enables the cases to be stacked in any configuration without the worry of them tipping over or sliding off one another (at up to a 45-degree angle). The positive engagement also corresponds to Drawer Systems as cases can find their home in a space efficient manner maximizing storage customization.All of these cases come fitted with a Gore-vent to allow air to pass back and forth keeping the contents inside cozy and dry while being able to adapt to changes in air pressure.

REDARC's Smart Battery Monitor allows you to step into every adventure with complete confidence, thanks to ist accuracy, Bluetooth connectivity range and easy monitoring.When out in the wild, the last thing you want to worry about is your power. The Smart Battery Monitor connects your 12V system to your phone via Bluetooth and delivers precise, real-time battery information to your fingertips.Get monitoring in minutes with just three connection points and convenient configuration app. Quick and easy to add to your 12V power system. Open the app with a single touch, and your battery details are right there. It's the easy choice for keeping track of your batteries, start monitoring in minutes.  The Smart Battery Monitor connects over distances up to 42m.The RedVision app delivers vital information to your fingertips including state of charge, charge remaining and current flow. It seamlessly integrates with the RedVision app through a reliable Bluetooth connection, meaning you can spend more time exploring and less time worrying about your batteries.  Features: Battery Chemistry: AGM, Gel, Lithium, Standard Lead Acid, Calcium Maximum Continous Current Rating: 500A Maximum Battery Capacity: 1250Ah Weight: 0,35kg LxWxH: 120 x 52 x 45mm Operating Voltage: 9 - 32V DC

The REDARC BCDC1240D under bonnet Battery Charger is a 12V 40A DC to DC battery charger, capable of high performance in engine bay installations, potted to survive and thrive against heat, water and dust. Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1240D Classic will charge from both solar and the alternator simultaneously. With built-in Green Power Priority it will select solar charging first, meaning less load on the alternator. Suitable for 12 or 24-volt vehicle systems, the unit will also work with either standard or variable/smart alternators. The BCDC1240D also comes with charging profiles, including a lithium charging profile perfect for pairing with a Lithium Battery. The "Dual" input range will continue to charge all other types of batteries including AGM, GEL, standard lead acid and calcium. As a guide the BCDC1240D is typically used for lead acid battery banks over 200Ah and lithium batteries over 100Ah. Check the manufacturer's data for your battery and ensure that the "Continuous Current Rating" of the charger does not exceed the manufacturer's recommended maximum charging current. For smaller batteries, we recommend the BCDC1225 69-02003.The technology in the BCDC has been tested to ensure battery life is maximised, charging your battery to a proven 100%. large capacity battery banks may require a few cycles to fully charge. Features: Separate DC and solar charging inputs Maximises the performance and life of your auxiliary battery Simultaneous DC and solar charging with Green Power Priority Suits 12V/24V standard and variable voltage/smart alternators Suitable for AGM, GEL, standard lead acid, calcium and Lithium (LiFePO4) batteries Suitable for use on vehicles with conventional alternator charging systems

The REDARC Smart Start SBI212D is a microprocessor controlled dual battery isolator used in a dual battery system. It is designed to be used as a solenoid priority system to protect the start battery from excessive discharge while allowing the auxiliary battery to supply non-essential loads. The SBI212D provides 12 volt DC incorporating 200A of continuous ratings and is designed for extremely heavy-duty operations. Dual Sensing The dual sensing model has the added feature of allowing charge both ways where the auxiliary battery may also be charged by an external source such as Solar panels or an external AC battery charger. The Smart Start SBI212D incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. It features sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions. Used primarily in 4WD and commercial vehicles, the Smart Start SBI is a safe way to charge an auxiliary battery and should often be installed with a fuse kit. Features: Overmould design Compact in size Power saving technology Fault indication Fully surge protected

Fits Ford Ranger P703 & Ford Ranger Raptor P703. PLEASE NOTE: To install the canopy, Load Box Reinforcement Brackets must be installed in your vehicle. If the J-Braces have not already been ordered from your Ford dealer, you can order the from us under following part numbers: For the Ford Ranger 6-RJBRACEP703 For the Ford Ranger Raptor 6-RJBRACERAPT Canopys may not be mounted without J-Braces.The SmartCap EVO Adventure is built for extreme on- and off-road use. From its 7-piece modular stainless steel design, to the double walled stainless steel Gullwing doors with interior Molle panels for mounting your gear, this SmartCanopy will take all the adventure you can throw at it.As standard, the RSI EVO Adventure is equipped with stainless steel side flaps without glass insert.Colour: matte blackOwn Weight: ca. 85 kgFeatures: Automotive grade ferritic stainless steel Modular design: kit consisting of five elements High load capacity: 45 kg (dynamic/static), Limited by manufacturer factory specifications. Standard accessories: C-rails for mounting a Roof carrier Additional ventilation system on the roof Lockable side and rear doors Third brake light (on vehicles, with the third brake light on the tailgate, the brake light on the hardtop must not be connected, as long as it is not covered by the hardtop) Attention:All RSI EVO hardtops are supplied as a kit and must be assembled prior to installation.This will require various tools, as well supplies (e.g. superglue & silicone, etc.). We always recommend to have the assembly as well as the installation done by a professional workshop.The manufacturer takes into account in the development of no accessories on and in the loading area! Also no original accessories such as lashing rails, style bars or load area protection! These accessories must be dismantled before the hardtop assembly and can no longer be used.Leaking:No pickup bed is 100% waterproof. For this reason RSI does not take this into account in the design. RSI Canopies consist of 5 elements an water penetration can occur at any connecntion point. Also the slide windows are not made for european weather conditions.

The SmartCap EVO Adventure is built for extreme on- and off-road use.From its 7-piece modular stainless steel design, to the double walled stainless steel Gullwing doors with interior Molle panels for mounting your gear, this SmartCanopy will take all the adventure you can throw at it.As standard, the RSI EVO Adventure is equipped with stainless steel side flaps without glass insert.Colour: matte black (on request also availabe in OEM white {6-EA0305-WH})Own Weight: ca. 85 kgFeatures: Automotive grade ferritic stainless steel Modular design: kit consisting of five elements High load capacity:350 kg (static) and 150 kg (dynamic)Standard accessories: C-rails for mounting a Roof carrier Additional ventilation system on the roof Lockable side and rear doors Third brake light (on vehicles, with the third brake light on the tailgate, the brake light on the hardtop must not be connected, as long as it is not covered by the hardtop) Attention:All RSI EVO hardtops are supplied as a kit and must be assembled prior to installation.This will require various tools, as well supplies (e.g. superglue & silicone, etc.). We always recommend to have the assembly as well as the installation done by a professional workshop.The manufacturer takes into account in the development of no accessories on and in the loading area! Also no original accessories such as lashing rails, style bars or load area protection! These accessories must be dismantled before the hardtop assembly and can no longer be used.Leaking:No pickup bed is 100% waterproof. For this reason RSI does not take this into account in the design. RSI Canopies consist of 5 elements an water penetration can occur at any connection point. Also the slide windows are not made for european weather conditions.

Only for use with approved Square Bars!

Please note: The Side Tray can be used on both sides. The delivery includes only 1 piece, either for right or left. If you want a carrier plate for both sides, you have to order 2 pcs.

Kit contains: 2x Sportz Crossbars 1260mm 1x RX300 legkit 4x Channel Nut M6 Whether you're embarking on a long road trip or a spontaneous weekend getaway, the Sportz bar elevates every journey with its robust yet elegant design. Its ease of use and versatile capabilities mean you can effortlessly switch between carrying bikes, kayaks or camping gear, allowing you to pursue your passions without hesitation. With the Sportz bar, you're not just setting off on an adventure, you are enhancing every moment along the way.Features: The Twin Strip Technology significantly reduces channel splitting and associated wind noise Underbar Slider allowing easy installation Zwifloc integration allows to effortlessly switch accessories Merges style with functionality City Crash and durability tested Tested to comply with the Roof Load Carries international ISO 11154 standard The RX300 legs provide a solid foundation for Rhino-Rack roof rack systems and are compatible with all existing RCP base kits. The RX300L and RX300H variants are not interchangeable. Selection depends on the specific roof shape, vehicle height, and any existing equipment such as a panoramic sunroof.Available in two different heights: RX300H: 52mm RX300L: 37mm Features: Compatible with all RCP base kits Suitable for Rhino-Rack Sportz, Vortex, Reconn, Heavy Duty crossbars, and Rhino-Rack Pioneer platforms

Pleaes noteThe roof top tent is designed for a maximum speed of up to 110 km/h! The Rhino-Rack softshell tent is perfect for individuals or a couple to get away in comfort. Functionality and simplicity is the core of our design, and the tent includes an innovative mounting system, an LED light and storage pockets. Overview: Tent can be installed/removed in only 5 minutes (after initial set up) using the innovative, Rhino-Rack designed mounting systemAwning over front door and rear window allows ventilation in all weather conditionsTested for vibration/durability, rain penetration, static load and city crashAll external materials use fire safe (CPAI-84 compliant) fabricLED strip light and boot bags includedCorrosion tested stainless steel hardwareIncludes a tent, ladder, mounting system, hardware and tools Note: Make sure your vehicle roof has a load rating higher than the weight of both the tent and any mounted accessories, and a static load limit that can support the tent in useThe Rhino-Rack mounting brackets accommodate M6 or M8 hardware. For non Rhino-Rack systems refer to their website for accessory mounting channel nuts to suit Specifications: Package length: 1480 mmPackage width: 1210 mmPackage height: 370 mmColour: Black/KhakiDimensions (Interior): 2050 x 1300mmDimensions (Packed): 1245 x 1360 x 330mmMaterial (Fly): 210D Rip-Stop Polyoxford PU coated (CPAI-84)Material (Tent): 600D Rip-Stop Polyoxford PU coated (CPAI-84)Mattress: 40mm Foam + aprox 20mm padded tent floor Product Weight: 45kg/99lbsSleeping Capacity: 2 peopleNote: after testing with european temperature conditions, we would like to point out to our customers that this is a summer tent.Please note:The inluded Fitting kit is optimized for Rhino-Rack Pioneer, Reconn- and Sportz-Crossbars. For other Crossbars additional items are required. For third party products please contact the manufacturer of your roof rack.You also can find additional accessories like Air-Mattress, Anti-Condensation Mat and Foam Topper in our webshop

Universal Adaptor for Stow iT Base Brackets 50-16SSIT2.Maximum Load: 20Kg per pair

Including Zwifloc.Rhino Rack presents the "Stow It" Utility Holder, a lockable universal holder for shovels, spades, paddles fishing rods and more. The "Stow It" Utility Holder is compatible with Pioneer platforms, Reconn-Deck, Vortex-, Sportz- & HD-bars.Features: Suits Pioneer Platforms, Reconn-Deck, Vortex-, Sportz- & HD-bars. mounting material included brackets made from powder coated aluminum Ease to handle/operate lockable Maxium Load: 8 Kg per pair MasterKey compatible Holds 10-50mm diameter items Weight: 0,7kg per pair

Rhino-Rack has engineered the Pioneer LED Light Bracket so lighting up the night whilst on the road with your LED lights has never been easier. Simply install LED lights to Rhino-Rack's range of Pioneer Roof Systems and don't let a shadow near again. The Pioneer Platform and Pioneer Tradie can have the LED Brackets fitted to either the front, back or sides of your vehicle. The Pioneer Tray can have LED Brackets fitted to the sides and rear only. Made from strong powder coated steel these Brackets are corrosion resistant, durable and stylish.For mounting on a Pioneer 6 platform, {50-19HSIT} is required.This article can also be combined with the Zwifloc Channel nuts (for Pioneer Platforms and Reconn-Deck bars).NOTE: Additional accessories may be required for installation. Please refer to the Zwifloc compatibility list.

Including moutning brackets and pegsWeight: 6,8KgFeatures: 1.1m long when packed and extands 1m from the vehicle when deployed Includes storage pockets, towl hanger, roll back roof, mounting brackets and pegs Made from 300D Polyester fabric laminated with silver privacy layer and weighted side walls Weatherproof and tear resistant, woven Polyester storage bag Note: The awning bag is weather-resistant, not waterproof. Please check regularly to ensure no water has collected inside the bag.

Features: 2200mm long when packed and over 6000mm when deployed Extends up to 2000mm from the edge of vehicle when deployed Made from 280gsm ripstop polycotton farbric with 2000mm waterhead pressure and UV50+ protection Weatherproof and tear resistant, woven Polyester storage bag Includes mounting brackets, pegs, guy ropes and optional poles Weight: 21,9kg (excl. brackets) Coverage: 8,4m² Note: The awning bag is weather-resistant, not waterproof. Please check regularly to ensure no water has collected inside the bag.

The LEDriving Curved Lightbar VX1000-CB SR SM offers a powerful and versatile lighting solution for both long-range and close-range illumination. Equipped with 36 high-performance OSRAM LEDs, it delivers an effective light output of 7650 lumens and ensures a visibility range of up to 525 meters. Its curved design seamlessly follows the lines of the vehicle, giving it a sleek and modern appearance. Even in challenging lighting conditions, the color temperature of up to 6000 Kelvin provides daylight-like visibility. The lightbar is approved for single mounting (2x ECE R149), meets protection standards (IP6K8 and IP6K9K), and features a robust aluminum die-cast housing with a slim, single-row construction. The included brackets allow for flexible installation at various points on the vehicle, including curved surfaces such as bumpers, grilles, or windshields.OSRAM's LED worklights and auxiliary lights offer the most demanding LED technology on the market.Attention: High beam and fog lights must be installed in pairs (except single mount).The manufacturer OSRAM grants a warranty of 5 years on LED worklights and auxiliary lights.The warranty conditions, scope as well as the address(es) of the manufacturer can be found at:www.osram.deYour statutory warranty remains unaffected.

Attention REF NO. 37.5 + 37.5OSRAM's LED worklights and auxiliary lights offer the most demanding LED technology on the market.Attention: High beam and fog lights must be installed in pairs (except single mount).The manufacturer OSRAM grants a warranty of 5 years on LED worklights and auxiliary lights.The warranty conditions, scope as well as the address(es) of the manufacturer can be found at:www.osram.deYour statutory warranty remains unaffected.

TRED Pro is the next generation of the already hugely successful TRED off-road recovery device engineered and manufactured in Australia, TRED Pro will outperform any other recovery board in the market. TRED Pro will give you the ability to explore with confidence, without the lack of traction disrupting your journey.TRED Pro is unique patented EXOTRED composite construction ensures that during wheel spin in recovery the ramp / teeth will not suffer instant catastrophic damage as experienced with other leading recovery ramp products.The special polyolefin material blend means TRED Pros can handle high levels of flex, are highly durable and wear resistant. The mix of elasticity and tough rigid design in the main body means that your TRED Pro's maintain a high level of pressure on your tyre, to provide ultimate traction whilst still being able to take the flex of being under the vehicles weight on unstable ground.With a breaking load of 1.1 tonnes per board, at a temperature range of -15°C to +70°C, the TRED Pro recovery boards are an ideal option for your trip!Specifications: Unique two-material construction Patented composite 2-layer nylon design Glass-filled nylon teeth CAD modelled 4X4 tyre patterns

With the TRED GT Levelling Pack you can safely and easily level your caravan/ camper your trailer or your car with mounted roof tent. As always, the excellent quality is noticeable in the used materials - made of UV-resistant, igh-quality polypropylene in automotive quality. The ARB TRED GT Levelling Pack features a grip profile to ensure maximum grip with the tire, as well as a grip profile on the underside to keep the levelling board securely on the ground. The levelling pack also features a dual-axle design that allows these ramps to fit between most dual-axle trailer wheels. The single pitch design allows for perfect positioning of the trailer or caravan on the ramp and adjustment of the wheel chock. In addition, the TRED levelling pack has incorporated "anti-sink plates" that integrate into the base of the ramp for storage. These plates prevent all common stabilizer legs from sinking in loose undeground.The scope of delivery includes two ramps with wheel chock and 4 anti-sink plates.Features: UV resistant high-quality Automotive grade polypropylene Grip profile to ensure maximum traction with the tyre Finite adjustment to position the vehicle, caravan, motorhome or Trailer Dual Axel ready design - fits most tandem axel caravans Unique TRED-LINK system - Joins two together 4 Sink plates for stabilizer legs Rating: max. 5000 kg per axle Dimensions: 49.5 x 18 x 26 cm (19.5" x 6.92" x 10.15") Weight: 5 kg (Pair)

Headlight set for mounting two Osram SX180-SP lights.Suits also Taubenreuther Snowplow carrier and winch mounting as well as Multi-Mount receiver.With our CAN bus high beam converter and the matching, vehicle-specific wiring loom, we cover all versions of the Ford Ranger and VW Amarok. Set contains: 1 x Vehicle specific mounting carrier 1 x Screw set 2 x Osram Spot Headlights 1 x Wiring kit 1 x CAN-Bus High Beam Converter Wiring harness for tapping the high beam signal from the CAN BusVehicle specific headlight kit that not only provides great light output, but also adds a nice accent without disturbing the vehicle design.Installation instructions for low beam & high beam (ECE R112):Based on ECE R112 (low beam & high beam control), headlamps must be installed in pairs (cars max. 4 & trucks max. 6 high beam sources with direct wiring.Each certified headlight has a reference number (abbreviated as REF. NO. in our texts). This is located directly on the lens cover or the housing. The sum of all reference numbers of the headlamps fitted to the vehicle (original + additional certificate) must not exceed 100!We recommend a professional Workshop. Also a switch is included to make a separate circuit. But this soulution is not StVZO compatible.

The ARB Slimline 100 Battery is an ideal choice for dual battery systems, utilizing lightweight Lithium Iron Phosphate (LiFePO4) cells. It provides high power handling, advanced charging capabilities, and comprehensive safety features. Additionally, it offers easy monitoring through a mobile app, ensuring a reliable power supply while preserving the health of the main vehicle battery - enhancing the overall off-road experience. Power and Capacity 100Ah Capacity (1280Wh): Provides ufficient power for common off-road adventures. 200A Discharge for 20 Minutes: Supports devices like 2000W coffee machines or induction cookers. Parallel Operation: Supports multiple batteries connected in parallel to provide more backup power. 40A 4-Stage Charging: Efficient and safe charging process. Dual Input Options: Accepts alternator alternator and solar inputs. Selectable Input Voltage: Compatible with standard and smart alternators. MPPT Function: Optimizes solar energy utilization. User-Friendly Monitoring Mobile App: Allows monitoring of battery metrics and error messages for enhanced management. Installation Support Vehicle-Specific Mounting Brackets: Developed by ARB to facilitate secure and efficient installation. Wiring Looms: Simplify the integration of the ARB Slimline 100 Battery into specific vehicle models.

Please note:Despite the mounting position, it is still possible to fit a snorkelfor batteries up to a maximum size of 325mm(L) x 180mm(W) x 185mm(H)The REDARC BCDC1225D under bonnet Battery Charger is a 12V 25A DC to DC battery charger, capable in engine bay installations.Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1225D will charge from both solar and the alternator simultaneously. And, with built-in Green Power Priority it will select solar charging first, meaning less load on the alternator.Suitable for 12 or 24-volt vehicle systems, the unit will also work with either standard or variable/smart alternators.The BCDC1225D features charging profiles making the unit suitable for charging AGM, Gel, Standard Lead Acid, Calcium and LiFePO4 batteries. Features: Separate DC and solar charging inputs Maximises the performance and life of your auxiliary battery Simultaneous DC and solar charging with Green Power Priority Suits 12V/24V standard and variable voltage/smart alternators Suitable for AGM, GEL, standard lead acid, calcium and Lithium (LiFePO4) batteriesIf you attach additional consumers such as coolers, winches, headlights, etc. to your vehicle, it is very often necessary to install a second battery. But where is the space for it? ARB has developed an mounting kit for pickup trucks.Made of galvanized, powder coated 3mm steel.Suitable for OPTIMA 4.2 batteries.

Please note:Despite the mounting position, it is still possible to fit a snorkelFor batteries up to a maximum size of 325mm(L) x 180mm(W) x 185mm(H)If you attach additional consumers such as coolers, winches, headlights, etc. to your vehicle, it is very often necessary to install a second battery. But where is the space for it? ARB has developed an mounting kit for pickup trucks.Made of galvanized, powder coated 3mm steel.Suitable for OPTIMA 4.2 batteries.

The system incorporates unique replacement fridge handle fasteners to accept the stainless steel strap brackets that also double up as a convenient bottle opener. Lower brackets can be directly mounted to provisions on the Elements Fridge Slide or to any other surface. Another practical addition is the buckle for securing the mains cable, which keeps the cable away from moving parts to prevent damage.

The new ARB "Elements Electric Coolbox" stainless steel cooler is equipped with unique features that not only increase utility and safety, but also facilitate access to food and refreshments.The case of the new cooler from ARB is made of stainless steel and tough, UV-resistant plastic. The "Elements" can be transported on the open loading area of the pickup truck so that no precious vehicle interior space has to be wasted. The box is splash-proof and weatherproof. So your provisions will stay dry cool even in the heaviest ainstorm. The insulation has been specially adapted to meet these requirements. The hinges are made of stainless steel and the caps are made of anodized aluminum and are therefore, like the other components of the "Elements" cooler, very stable and durable.A new feature is the gas pressure damper specially developed by ARB, which holds the lid in any position. Previously, the lid always had to be held with one hand, clamped against the headliner or support against the head. This is now a thing of the past! With the introduction of our innovative gas pressure damper, the lid is held open in any position (from closed to upright).The "Elements" cooler has a unique magnetic lock that protects the contents of the cooler from unwanted access and is activated via the touchpad control panel. This means that children or strangers, for example, can only access the contents with the appropriate code. In addition, the user-friendly touchpad control panel of the weatherproof cooler allows full functionality (such as temperature control) when the lid is open, but prevents unwanted settings by individual code entry, as no settings can be made when the lid is closed. In addition, the "Elements" cooler has a padlock recess. This provides additional security that your provisions are not stolen in public parking lots or campgrounds.Conventional features of the "Fridge Freezer" series, such as the built-in deep discharge protection, the LED interior lighting pointing in the direction of view, the drain plug and the fully integrated cabinet are of course also built into the "Element" version.

Introduced at Automechanika in 2014, the OME BP51 remains the top product in the OME shock absorber range. With its innovative technology and outstanding performance, it sets benchmarks in its class. By combining the advantages of twin-tube, monotube, and bypass shock absorber designs while eliminating their disadvantages, it achieves exceptional performance and unique capabilities. Maximum piston travel and length through relocation of the separator piston and gas reservoir into a separate remote canister. Very progressive and broad tuning range by utilizing the large 51mm piston in combination with bypass channels. Only the integration of bypasses into the dual-wall body makes it possible to use it as a compact coilover. The bypasses also serve as hydraulic end stops, reducing stress on the original rubber bump stops and piston rod. Only the dual-wall, 4mm thick housing ensures perfect protection of the cylinder bore from external impacts. The use of high-strength aluminum with excellent heat dissipation and extra- large oil volume provides perfect thermal stability. 10-stage adjustability in both directions, independently and while installed, allows for individual tuning at any time to suit the driver and specific conditions. Uncompromising use of premium components such as hard-anodized 6061 T6 aerospace- grade aluminum, Teflon-steel braided lines, and uniball bearings in coilovers ensures long service life. Whether you value high ride comfort in an empty vehicle, enduring performance on long trails with a fully loaded expedition rig, or maximum flexibility with the BP51, you always make the best choice.If your vehicle is equipped with a strut, the OME BP51 strut will be delivered pre-assembled and ready to install. Upon request, we are also happy to adjust the spring seat for you free of charge. However, we will need specific details about the vehicle such as engine type, transmission, and the weight of any installed accessories, unless you have already completed our suspension configurator. A vehicle-specific fitting kit is also required for the initial installation.

Introduced at Automechanika in 2014, the OME BP51 remains the top product in the OME shock absorber range. With its innovative technology and outstanding performance, it sets benchmarks in its class. By combining the advantages of twin-tube, monotube, and bypass shock absorber designs while eliminating their disadvantages, it achieves exceptional performance and unique capabilities. Maximum piston travel and length through relocation of the separator piston and gas reservoir into a separate remote canister. Very progressive and broad tuning range by utilizing the large 51mm piston in combination with bypass channels. Only the integration of bypasses into the dual-wall body makes it possible to use it as a compact coilover. The bypasses also serve as hydraulic end stops, reducing stress on the original rubber bump stops and piston rod. Only the dual-wall, 4mm thick housing ensures perfect protection of the cylinder bore from external impacts. The use of high-strength aluminum with excellent heat dissipation and extra- large oil volume provides perfect thermal stability. 10-stage adjustability in both directions, independently and while installed, allows for individual tuning at any time to suit the driver and specific conditions. Uncompromising use of premium components such as hard-anodized 6061 T6 aerospace- grade aluminum, Teflon-steel braided lines, and uniball bearings in coilovers ensures long service life. Whether you value high ride comfort in an empty vehicle, enduring performance on long trails with a fully loaded expedition rig, or maximum flexibility with the BP51, you always make the best choice.If your vehicle is equipped with a strut, the OME BP51 strut will be delivered pre-assembled and ready to install. Upon request, we are also happy to adjust the spring seat for you free of charge. However, we will need specific details about the vehicle such as engine type, transmission, and the weight of any installed accessories, unless you have already completed our suspension configurator. A vehicle-specific fitting kit is also required for the initial installation.

Introduced at Automechanika in 2014, the OME BP51 remains the top product in the OME shock absorber range. With its innovative technology and outstanding performance, it sets benchmarks in its class. By combining the advantages of twin-tube, monotube, and bypass shock absorber designs while eliminating their disadvantages, it achieves exceptional performance and unique capabilities. Maximum piston travel and length through relocation of the separator piston and gas reservoir into a separate remote canister. Very progressive and broad tuning range by utilizing the large 51mm piston in combination with bypass channels. Only the integration of bypasses into the dual-wall body makes it possible to use it as a compact coilover. The bypasses also serve as hydraulic end stops, reducing stress on the original rubber bump stops and piston rod. Only the dual-wall, 4mm thick housing ensures perfect protection of the cylinder bore from external impacts. The use of high-strength aluminum with excellent heat dissipation and extra- large oil volume provides perfect thermal stability. 10-stage adjustability in both directions, independently and while installed, allows for individual tuning at any time to suit the driver and specific conditions. Uncompromising use of premium components such as hard-anodized 6061 T6 aerospace- grade aluminum, Teflon-steel braided lines, and uniball bearings in coilovers ensures long service life. Whether you value high ride comfort in an empty vehicle, enduring performance on long trails with a fully loaded expedition rig, or maximum flexibility with the BP51, you always make the best choice.

Introduced at Automechanika in 2014, the OME BP51 remains the top product in the OME shock absorber range. With its innovative technology and outstanding performance, it sets benchmarks in its class. By combining the advantages of twin-tube, monotube, and bypass shock absorber designs while eliminating their disadvantages, it achieves exceptional performance and unique capabilities. Maximum piston travel and length through relocation of the separator piston and gas reservoir into a separate remote canister. Very progressive and broad tuning range by utilizing the large 51mm piston in combination with bypass channels. Only the integration of bypasses into the dual-wall body makes it possible to use it as a compact coilover. The bypasses also serve as hydraulic end stops, reducing stress on the original rubber bump stops and piston rod. Only the dual-wall, 4mm thick housing ensures perfect protection of the cylinder bore from external impacts. The use of high-strength aluminum with excellent heat dissipation and extra- large oil volume provides perfect thermal stability. 10-stage adjustability in both directions, independently and while installed, allows for individual tuning at any time to suit the driver and specific conditions. Uncompromising use of premium components such as hard-anodized 6061 T6 aerospace- grade aluminum, Teflon-steel braided lines, and uniball bearings in coilovers ensures long service life. Whether you value high ride comfort in an empty vehicle, enduring performance on long trails with a fully loaded expedition rig, or maximum flexibility with the BP51, you always make the best choice.

Greasable Shakle pins (2 pcs) for OME Leafspring in conj. with 3-8118

The Bushranger Kinetic Rope aka the "Super Stretchy Rope", is an effective and practical addition to your recovery kit. Able to stretch by approximately 30% of its original length. This ability to stretch allows for the rope to build more momentum, which in turn generates a higher pulling force. Features: Elongates by approximately 30% of its length Flexible and strong woven nylon 66 construction Durable vinyl polymer coated loop eyes Sliding protective sleeve to shield rope from abrasions and damage Tie straps with velcro to secure rope for storage Included storage/carry bag

Please note:Does not suit VW Amarok 2023 & PHEVFord Ranger models

Fits XL, XLS, XLT, Sport & Wildtrak models. Also Fits AdBlue models.Installation Time Tank: ca. 8h

Der Universal-Kabelsatz dient zur Einbindung der Scheinwerfer in das Fern- licht, muss aber je nach Fahrzeug evtl. abgeändert werden (Polung etc.).

PlugIn AdapterSuits follwoing vehicles Ford Ranger 2AB MK8 2023 on VW Amarok 2023 onPlease Note: Max. 1 Adjustment VIN must be specified while orderingfor correct adjustment due of adjustment the deliverytime isat least 7 working days.

The softshackles are feather-light and flexible with a enormous breakingload. Originally developed for rigging at sea this useful helpers become more and more popular in the offroad and forestry scene. Pros.: feather-light(120g) and flexible with a huge breaking load enormous working load of 4000kg enormous breaking load of 7000KG made of Dyneema® lower noise level and a minimum of injury potential(Non-Metal-Construction) no undesired opening on load no hook, no thimble that can scratch your vehicle paintwork