Bushranger Mudtamer Floor Mats rear, pair, black

The Bushranger Mud Tamer Floor Mats are designed with deep edges to capture all the debris that is brought into the vehicle, from sand, dirt, mud, snow, even water can be contained within the mats. Made from a solid rubber construction that retains integrity and shape and easy to clean. A high perimeter ridge to keep debris enclosed from your interior material. The underside of mat features pips to prevent mat slippage. Generous in size, they can also be trimmed for a superior custom fit for your vehicle footwell.

Not suitable for Ford Ranger PVEH HybridPlease note: To install a CargoGlide bedslide, you need the following mounting bracket:CGA0110YCGBBLKFeaturing a highly adaptable single drawer with a massive 180 kg capacity, DECKED midsize Drawer System combines weatherproof, lockable, ultra-secure storage with a 454 kg payload-rated, D-ring tie-down equipped deck for unparalleled versatility. Complete RedesignSeeking to maximize storage capacity and eliminate wasted space in the bed, DECKED created one Drawer to replace the two asymmetrical drawers previously offered. Reducing the system payload requirement from 900 kg to 454 kg more accurately reflects the use cases and capacities of modern mid-size trucks. It also enabled engineers to create the single Drawer with a 180 kg payload rating. Drawer spans from wheel well to wheel well and runs the full length of the bed. With 30% more drawer storage capacity than previous versions, midsize customers will now have more than enough space for their tools, camping gear, or bug-out essentials. This drawer can also be reconfigured into a big sliding tray by removing the drawer sides for better access and storage customization with DECKEDs line of D-co Cases.Added Cargo Tie-DownsThe mid-size Drawer System features six burly 180 kg load-rated steel-to-steel bed tie-down locations atop the deck, three on either side. Just as in the fullsize, cargo tie-downs are integrated into the outbound edge of the deck of the system using a D-ring tie down system. When not in use, these D-ring tie-downs lie flat, countersunk in the surface.Enhanced WeatherproofingJust as in the full-size update, increased protection from the outside environment has been realized by adding cabside and drawer-side closeout panels which wrap the drawers in a protective shield as well as a more effective drawer face seal against the elements. These additions vastly reduce the amount of air which can swirl around in the bed and possibly deposit dust or other airborne particulate matter into the drawer.Please Note:The manufacturer does not account for accessories in and on the loading area in the development. Also no original accessories such as lashing rails, style bars or load area protection! These accessories must be dismantled before the drawers assembly and can no longer be used.

Please note:Does not fit in prior generation DECKED Drawer SystemsThe DRAWER LOCK System makes perfect sense to protect your gear.Especially hunters will love the fact, that they can lock the drawers. But also on building sites, in public parking and on Campgrounds the Locks can be very profitably!

Trimpacker are sold as piece.

2-tube shock absorber with 70mm housing diameter, rebound adjustable, for up to 50mm lifted supsension.KONI Heavy Track RAID 23-88XXX/90XXX KONI Heavy Track RAID Series 88.../90...Twin-Tube hydraulic shock absorber without gas. Stepless adjustable when dismatled. Specially made for Offroad conditions and vehicles with raised suspension. Overall lenght is optimized. These shocks are recommended for fully loaded Overlandig-Vehicles. Housing diameter is up to 70mm for higher oil-volume. Most shocks of this Series are equipped with hydraulick rebound stop (if tech. possible)

2-tube shock absorber with 70mm housing diameter, rebound adjustable, for up to 50mm lifted supsension.KONI Heavy Track RAID 23-88XXX/90XXX KONI Heavy Track RAID Series 88.../90...Twin-Tube hydraulic shock absorber without gas. Stepless adjustable when dismatled. Specially made for Offroad conditions and vehicles with raised suspension. Overall lenght is optimized. These shocks are recommended for fully loaded Overlandig-Vehicles. Housing diameter is up to 70mm for higher oil-volume. Most shocks of this Series are equipped with hydraulick rebound stop (if tech. possible)

tensile strength: 19 t

Suits only vehicles with ARB Canopy.OE must be fitted.If your Tailgate is fitted with an OE ball stud, please use the Tailgate Assist 6-4770030 instead.Due to the higher load on the tailgate caused by the "Tub Stop" which is mounted on the tailgate when installing an ARB hardtop, the struts on this version of the Tailgate Assist are calibrated for this additional load.The tailgate assistant supports not only the opening but also the closing of the heavy tailgate.A high-quality Stabilus damper brakes the tailgate from falling down during opening, thus protecting the material and reducing the risk of injury. Closing the tailgate is in turn facilitated by torsion bar/damper (depending on the vehicle model). Thus, one-hand operation is possible.

Please note:For assembling two safty guards 55-010-0150 are required.

Please note:For Guard plate 55-01-0160 you'll need two safety guards.

Reduces the heat and moisture build up under the mattress and adds and extra cushion effect. Material: 100% Polyester

Features: Carries 1 jerry can vertical or horizontal Made from lightweight aluminium your roof Suits off-road use Simple installation and removal Adjustable positioning

The Aluminium Folding Ladder Bracket facilitates the attachment of your Rhino-Rack Aluminium Folding Ladder to any side of your Pioneer System. This easily installed Aluminium Folding Ladder Bracket is engineered to be strong, durable and corrosion resistant. No matter where you're working or exploring it will stand up to the elements. Once you've finished using the Aluminium Folding Ladder keep the dirt outside your vehicle by fixing it to your Pioneer Roof System.This article can also be combined with the Zwifloc Channel nuts (for Pioneer Platforms and Reconn-Deck bars).NOTE: Additional accessories may be required for installation. Please refer to the Zwifloc compatibility list.

A Rhino-Rack Ratchet Grab is the ideal accessory to ensure that your load is fastened and secured to your roof racks. With twin hooks and bright blue 3m / 10ft straps, the RRG1 is recommended to be used when securing large items down to your roof racks like ladders, timber or even a small boat.Features: Secure your load with confidence Comes with a 3m / 10ft long blue strap Strap made from high-grade webbing Load Rating up to 680kg / 1500lb High Quality Stainless Steel for long lasting durability

Adjustable feet extend to 325mmto ensure stability on uneven ground.Maximum ladder length 2325mmMaximum load rating of 125kgLadder folds to 1060mmAttachemet brackets for Pioneer included (not for Transport).Transport mounting bracket 50-16RUFLBhas to be ordered separateley.This article can also be combined with the Zwifloc Channel nuts (for Pioneer Platforms and Reconn-Deck bars).NOTE: Additional accessories may be required for installation. Please refer to the Zwifloc compatibility list.

The Eyebolts with Zwifloc is designed to provide versatile tie down points for your Pioneer platform, Reconn-Deck, Vortex or Sportz cross bars. The kit includes 4 Eye Bolts, each with the patented Zwifloc channel nut, which allows quick and easy installation anywhere without moving other accessories.

Every avid camper or 4WDer knows a spare wheel is one of the essential items you need to bring with you on any adventure. Rhino-Rack has developed a spare wheel strap to securely fasten your wheel to our range of Pioneer Trays and Platforms so you can free up the space inside your vehicle. The installation is simple to attach and detach but most importantly it will secure your spare wheel for those unfortunate situations.Features: Easy to install Transport your spare wheel outside your vehicle Easily mounted to your Rhino-Rack Pioneer Tray and Platform Made from strong and durable materials Includes incrementally adjustable straps Includes tightening ratchets as well as 2 x cam buckles

Features: Save fuel by removing your tent when not in use Simplyfix the 4 mounting brackets to your Pioneer platform or Reconn-Deck and the bars to your tent, and you have a system that enables quick and easy removal and installation of a roof top tent Suitable for most roof top tents with aluminium honeycomb or PP bases. Not suitable for tents with slat base Includes siliconised strip to reduce damage to Pioneer platform Includes Zwifloc Two mounting extrusions, four brackets and all hardware included

Suits the following Pioneer 6 Platforms: Pioneer 6 2100 x 1430 mm 50-1262104 Pioneer 6 2100 x 1240 mm 50-1262107

Kit contains: 1 x Pioneer 6 Platform 1 x RX100 Legkit Fits the following vehicles: VW Amarok Double Cab with Roof Rails '23 on Ford Ranger Wildtrak Double Cab with Roof Rails '23 on Ford Ranger Wildtrak Double Cab with Roof Rails 2012 - 2022 Dacia Duster '25 on, with raised Rails Nissan Navara NP300 Dual Cab with Roof Rails '15 on Great Wall Steed with Roof Rails 10/2017 on Mercedes X-Class with Roof Rails 04/2018 on Cupra Formentor with raised rails Seat Ateca with raised rails GWM Cannon Alpha with raised rails Rhino Rack's strongest and most versatile roof rack ever, yet it still boasts up to a 60% reduction in drag, a 20% reduction in weight, and 25% more usable channels, enabling every inch of the platform to be ustilised for mounting accessories. Quieter and lighter than ever, the unique alloy components and scuff-resistant coating ensure there's no compromise in quality, allowing you load more than ever before without sacrificing your gear for adventure. With integrated capabilities, additional east/west mounting channels, and the most comprehensive ecosystem of accessories on the market, the Pioneer 6 Platform makes you the Pioneer of your adventure. Except for the outer C-Channels, the installation of accessories is only possible with Zwifloc Channel NutsFeatures & Data: Up to 60% reduction in drag from its predecessor Stronger alloys that maintain strength but reduce weight by 20% too No channel apertures make 100% of the platform usable for mounting accessories Improved performance with up to 25% more usable channels harder coating to reduce damage and scuffs East/West mounting channels for more mounting options than ever before Integrated wiring capabilities within all extrusions Detachable wind fairing inserts in leading-edge further enhance drag reduction The Rhino Rack RX Leg-kit is designed specifically for use with roofs that feature raised rails. The RX Leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality.Features: Quick and easy installation Compatible with Rhino-Rack Vortex Bars and PioneerNG Platforms Easy access to Vortex-Bar channel for quick accessory installation

Features: 3x Velcro panels provide connection for accessories and patches 2x ARB patches included Sturdy rear panel with metal beams to reduce fitment Adjustable strap with buckles for easy, robust fitment 4x zippered pockets with padded walls 3x exterior pockets Mesh pocket and lined bottle holder Tablet strap on top pocket enables attachment of fold over style covers 25.5cm strap opening Meets FMVSS302