ARB Seat Organiser

This article is supplied without parts certificate or test report. By the assembly the operating license of the vehicle expires if not immediately a, according to StVZO §19, Abs. 2 in connection with §21 prescribed test is accomplished. After the technical modification has been carried out, the vehicle must therefore be immediately presented to an officially recognized expert at a technical inspection center.However, the respective expert/inspector is free to refuse registration!In addition, all parts of the company Long Ranger Tanks, ARB, OME, etc. are accompanied exclusively by English assembly instructions. Please note: The ARAMAY Snorkel are not designed for standard motor controls! These snorkels were specially developed for engines that have been upgraded by increasing power (larger turbo, additional intercooler, modified engine control).

Lochabstand (Mitte/Mitte): 25mm

500 daN loading capacity

The Rhino-Rack Reconn-Deck Bar is a strong and durable crossbar. It has integrated channels on all four sides, allowing for mounting of accessories. These are available as a single item, and are available in three different predefined lengths to suit a range of vehicles.The scope of delivery includes one Reconn-Deck Bar in lenght 1500mm.Futher lenghts are also available: 1260mm (50-10RDB126) 1650mm {(50-10RDB165)} Features: Lenght: 1500mm Integrated channels on all 4 sides for mounting of accessories Made from powder coated aluminium providing the ultimate in corrosion resistance Removable end caps for easy installation of accessories. Secure core locks included Compatible with most Rhino-Rack Pioneer and crossbar roof rack accessories Option to run 3 crossbars on selected vehicles with longer tubs Underside channels can be accessed to mount recovery tracks, shovel or other accessories Up to 150kg/330lb on-road and off-road and off-road load rating. Up to 375kg/826lb static load rating.**To get your cargo capacity - subtractthe system weight from the system loadlimit. Manufacturers load limits apply. Please note:the length specification refers to the aluminium bar. The length of end caps or connectors musst be added to each side.

Secure, vehicle specific floor protection - ARB Mats are an easy to clean essential for all the debris that life can bring to your vehicles floor.Expertly designed to catch and hold debris, ARB Floor Mats are a waterproof solution that includes secure foot placement and a snug fit to cover all areas of your OE footwells and even utilise the vehicles retention clips where applicable.The moulded deep-dish design makes them easy to clean- simply wipe or hose off any debris, dry and then place back in the vehicle ready for the next adventure.The thermoplastic elastomer material provides an odourless solution which has seamless edging to provide secure grip and protection across all of your typical high impact carpeted surfaces.Features: Vehicle and model specific 100% waterproof and simple to clean 3D moulded to each vehicle for a perfect fit every time with elevated edges to retain debris Made from thermoplastic elastomers that provide all the benefits of rubber without the odour Two-stage design for secure foot placment, reduced spillage and complete protection Unique surface texture designed and moulded for a secure grip over the entire surface Seamless edging to integrate with vehicle's interior Engineered debris channels that disperse debris towards catchment zones Includes one driver mat, one passenger mat and one set of rear mats or a full single rear mat depending on vehicle

The Stow iT Awning Adaptor is the perfect option to mount the Rhino-Rack Batwing or Sunseeker Awning to your vehicle. The Awning Adaptor is used to conjunction with the Stow iT Base Bracket 50-16SSIT2 where it simply slides into the base bracket giving you the option to remove and store the awning when not in use.Can only be used with the Stow iT Starter Kit or Base Brackets: STOW iT Base Brackets 50-16SSIT2 Features: Two mounting holes and a slot provide the flexibilty to mount a Batwing or Sunseeker Awning at different heights. Slides in and out of the Stow iT base bracket allowing the awning to be removed with ease when not in use Maxium Load: 20kg per pair.

Reduces the heat and moisture build up under the mattress and adds and extra cushion effect. Material: 100% Polyester

The Rhino-Rack Cargo Case is a heavy duty storage box perfect for when you need to store anything from wet gear to tools on your vehicle roof or tub. Simply throw your gear in or use the included diced foam insert to mold around sensitive equipment.If mounting to a Rhino-Rack platform, each case comes with a template so you can drill out mounting holes in the exact location. The case is mounted using the quick release Zwifloc channel hardware, and the IP67 water proof rating is maintained with the OEM approved gasketing washers. Features: Waterproof, shock proof and dustproof 94 litres of space Pressure equalisation valve to prevent altitude deformation Padlock holes to protect your gear Includes foam Contents inlcuded: 94L cargo case, foam inserts mounting hardware and tools. Dimensions: Dimensions (external) : 1187 x 525.5 x 202.5mm Dimensions (internal) : 1120 x 465 x 180mm Capacity : 94L Weight : 8,9kg

The 50-16SSIT2 replaces the previous version 50-16SSIT and now only contains 2 instead of 4 base brackets. Also the universal adapters are no longer included, these are now available seperately under item number 50-16USIT. This is not because Rhino-Rack wants to provide less, but rather because initial experience with the previous version has shown that it is a quick-release system that serves a very specific purpose on the vehicle. The best example of this is the Sunseeker awning, which already has a 50-16SSIT2 and a 50-16USIT universal adapter kit included. In difficult or changing storage conditions, an additional 50-16SSIT2 which is mounted on the opposite side of the vehicle, makes it easy to move the anwing from one side to the other or even back and forth between two vehicles.When mounting light bars or rollers, the following adapters are needed: Light bars adapter: 50-16ISITRollers adapter: 50-16OSITFeatures: Compatible with Pioneer Platforms, Vortex and Reconn-Deck Quick and easy removel of side mounted accessories Zwifloc channel nuts allow brackets to be placed without moving other accessories 20 Kg max load per bracket pair weight: 1 Kg Contents included: 2 STOW iT Base Brackets

The Eyebolts with Zwifloc is designed to provide versatile tie down points for your Pioneer platform, Reconn-Deck, Vortex or Sportz cross bars. The kit includes 4 Eye Bolts, each with the patented Zwifloc channel nut, which allows quick and easy installation anywhere without moving other accessories.

Thread Size: M6

The TRED Quick Release Mounting Pins have been designed to make the installation of recovery boards to a vehicle, trailer or caravan much easier and more secure. Features: Lockable with a padlock to safely secure your recovery boards Unique design will mount up to four TRED recovery boards

Keeping accurate tyre pressure for your tyres is a necessity for good fuel economy, prolonged tyre life and maximum traction. Introducing the new ARB digital tyre inflator which provides accurate reading and inflation for your next 4WD adventure.Most four wheel drivers understand the the importance of running the correct tyre pressures for different situations and or load variances. This is why its so important to carry an accurate air pressure gauge and tyre inflation equipment in your vehicle, especially when driving off road. The he new ARB digital tyre inflator makes checking and adjusting your vehicles tyre pressures a fast and simple operation thanks to its large easy to read digital blue backlight display, big humb operated inflator button and easy access deflator bleed button.Features:

Spezifications: 2x 4.5l side Pockets Main Pocket 60l Dimensions: 590 x 440 x 210mm

The ARB Pinnacle Camp Chair offers a premium seating experience when travelling. It features a sturdy, sleek black steel frame with contrasted charcoal brackets and a quick release bracket on the rear, making it easy to fold down when you're ready to pack up. The body of the chair is made from 600D polyester and 420D ripstop panels and features a tonal print and internal padding throughout. The wide armrests provide ultimate comfort when in use. There is an abundance of storage for your essentials with a rear mesh pocket and built in side panel featuring a cup holder and additional pockets. To top it all off the chair comes with a spacious 600D polyester carry bag featuring webbing straps and a premium shoulder pad for easy storage and carrying. Features: 600D polyester camp chair with sturdy steel frame and built-in padding throughout 420D ripstop contrasting panels Wide armrests for comfort Built-in side panel with cup holder and storage pockets Rear mesh pocket Spacious 600D polyester carry bag with webbing straps and shoulder pad for easy storage and carrying

The ARB Base Camp Chair is the perfect all-rounder for travelling. It features a sturdy, sleek black steel frame with contrasted charcoal cross-bars. The body of the chair is made from 600D polyester and 420D ripstop panels and features a tonal print and internal padding throughout. The padded armrests provide ultimate comfort when in use. There is a rear mesh pocket for storing the essentials and a swivel cup holder to keep your drink close. To top it all off he chair comes with a spacious 600D polyester carry bag featuring webbing straps and a shoulder pad for easy storage and carrying. Features: 600D polyester camp chair with sturdy steel frame and built-in padding 420D ripstop contrasting panels Padded armrests for comfort Swivel cup holder Rear mesh pocket Spacious 600D polyester carry bag with webbing straps and shoulder pad for easy storage and carrying

The MAXTRAX MKII Recovery Board is manufactured from durable, reinforced nylon. The teeth grip into the tire tread and the ground for easy and efficient recovery - ideal for your 4WD vehicle.With a length of 1150 mm, a width of 330 mm and a height of 85 mm, the recovery board can be stowed away to save space. It weighs 3.4 kg and is easy to transport thanks to the six integrated handles. The shovels at both ends ensure that mud can be removed to free the vehicle efficiently. The MAXTRAX MKII also has mounting points for secure attachment. Breaking strength: up to 4.500kg

Secure your gear with this steel core strap and lock. So, whether its your ladder at work, a kayak, awning or gas bottle, you can be sure it is locked down when you're not around.Features: Made from plastic-sheathed steel interwinded cords Masterkey compatible Can be placed without moving other accessories.

Secure your gear with this steel core strap and lock. So, whether its your ladder at work, a kayak, awning or gas bottle, you can be sure it is locked down when you're not around.Features: Made from plastic-sheathed steel interwinded cords Masterkey compatible Can be placed without moving other accessories.

With C-Channel to mount bike carriers, kajak-carrier, luggage boxes and more.

Universal Adaptor for Stow iT Base Brackets 50-16SSIT2.Maximum Load: 20Kg per pair

To convert your whole Rhino rack products to a one Key System.

Thread Size: M6

Every avid camper or 4WDer knows a spare wheel is one of the essential items you need to bring with you on any adventure. Rhino-Rack has developed a spare wheel strap to securely fasten your wheel to our range of Pioneer Trays and Platforms so you can free up the space inside your vehicle. The installation is simple to attach and detach but most importantly it will secure your spare wheel for those unfortunate situations.Features: Easy to install Transport your spare wheel outside your vehicle Easily mounted to your Rhino-Rack Pioneer Tray and Platform Made from strong and durable materials Includes incrementally adjustable straps Includes tightening ratchets as well as 2 x cam buckles

The engineered Pioneer Maxtrax side Bracket secures 2 Maxtrax Recoveryboards to your Rhino-Rack Pioneer Platform or Pioneer Tray.For mounting on a Pioneer 6 platform, {50-19HSIT} is required.Please also Note: For TREDPRO 2x 35-TQRMK is highly recommended Mounting Pins 50-RMTXMPS required for Maxtrax This article can also be combined with the Zwifloc Channel nuts (for Pioneer Platforms and Reconn-Deck bars).NOTE: Additional accessories may be required for installation. Please refer to the Zwifloc compatibility list.

Fits for followning Awnings: Batwing 270 Freestanding left 50-032145 Batwing 270 Freestanding right 50-032146 Batwing 180 Freestanding 50-032147 Sunseeker Freestanding 50-032148

The Rhino-Rack Reconn-Deck NS Bar is a strong and durable crossbar. that allows you to build your own Reconn-Deck platform. It has integrated channels on all four sides, allowing for mounting of accessories. These are available as a pair, and are available in three different predefined lengths to suit a range of vehicles.The scope of delivery includes two Reconn-Deck NS Bar in lenght 750mm.Futher lenghts are also available: 500mm (50-10RDNSB50) 1000mm (50-10RDNSB100) Features: Lenght: 750mm Create a Reconn-Deck platform with a combination of Reconn-Deck Bars and Reconn-Deck NS Bars. Choose a configuration to suit your adventure best, with two Reconn-Deck Bars and up to four Reconn-Deck NS Bars to customise your platform Integrated channels on all 4 sides for mounting of accessories Made from powder coated aluminium providing the ultimate in corrosion resistance Reconn-Deck NS Bars can be moved to suit all setups. Bars can be moved/spaced out to suit users specific needs Secure core locks included Compatible with most Rhino-Rack Pioneer and crossbar roof rack accessories Underside channels can be accessed to mount recovery tracks, shovel or other accessories Quick and easy to install or dismantle Up to 150kg/330lb on-road and off-road and off-road load rating. Up to 375kg/826lb static load rating.**To get your cargo capacity - subtractthe system weight from the system loadlimit. Manufacturers load limits apply. Please note:the length specification refers to the aluminium bar. The length of end caps or connectors musst be added to each side.

for fitting to fixing points in roofKit contains: 1 x Pioneer 6 Platform 2 x legkits RLT600 4 x mounting kit QMFK04 2 x height spacer QMVA05 1 x wedge QMW05 8 x M6x30 hex set screwRhino Rack's strongest and most versatile roof rack ever, yet it still boasts up to a 60% reduction in drag, a 20% reduction in weight, and 25% more usable channels, enabling every inch of the platform to be ustilised for mounting accessories. Quieter and lighter than ever, the unique alloy components and scuff-resistant coating ensure there's no compromise in quality, allowing you load more than ever before without sacrificing your gear for adventure. With integrated capabilities, additional east/west mounting channels, and the most comprehensive ecosystem of accessories on the market, the Pioneer 6 Platform makes you the Pioneer of your adventure. Except for the outer C-Channels, the installation of accessories is only possible with Zwifloc Channel NutsFeatures & Data: Up to 60% reduction in drag from its predecessor Stronger alloys that maintain strength but reduce weight by 20% too No channel apertures make 100% of the platform usable for mounting accessories Improved performance with up to 25% more usable channels harder coating to reduce damage and scuffs East/West mounting channels for more mounting options than ever before Integrated wiring capabilities within all extrusions Detachable wind fairing inserts in leading-edge further enhance drag reduction

Awning Extension or Side Wall for Sunseeker 2m AwningSide Wall for Sunseeker 2,5m and Sunseeker freestanding 2,2m

Headlight mounting kit to fit two Osram SX180-SPSwitching to high beam is only possible with 35-CANDEC + 35-3521110Vehicle specific headlight kit that not only provides great light output, but also adds a nice accent without disturbing the vehicle design.Kit includes: Vehicle specific mounting carrier (incl. Fitting Instruction) 2x OSRAM Spot Headlights 36-3LEDDL105-SP 1x Universal Cable Harness 2-3500520The Universal Cable harness enable a integration to the Vehicle driving beam. For some vehicles it may have to be reworked. We recommend a professional Workshop. Also a switch is included to make a separate circuit. But this soulution is not StVZO compatible.

Keep your vehicle clean and organised with the Tailgate Bin Bag.With a large main compartment and an additional front storage pocket, the Tailgate Bin Bag is incredibly versatile and can be used in many ways. It provides storage for unwanted rubbish, recyclables and dirty recovery gear keeping odours out of your vehicle. Excellent construction inside and out. This bag is an essential for any touring or muddy weekend away. Features: Large main compartment with an overall volume of 40L Zippered front pocket which is great for storing smaller Items such as keys, sunscreen or extra bin liners Padded walls and an internal wire frame to maintain structure when the bag is not full Inner Velcro webbing tabs to secure your bin liner Full mesh base to help with cleaning and drainage Large easy roll top to keep rubbish or wet items sealed when not in use or on the trails Durable PVC exterior which allows for easy cleaning after dusty or muddy conditions Built in carpeted base pad and included paint protection film for added tailgate protection Sturdy adjustable strapping system with built In neoprene sleeve to keep your bin secure on most sized tailgates Ability to swing away when lowering tailgate

The color of the item may possibly differ from the one shown.Adapterkit enables to use EU standardconnections to ARB compressorcouplers.

Features: 3x shower head mount locations; roof, backwall Velcro, back wall hooks Ample storage - 5x pockets total Integrated roof with centre bow 200 GSM, silver coated canvas Adjustable height. Pegs includes Integrated dual colour lighting options (warm & cool LED) Optional roof or wall lighting Dimmable via USB-C controller Integrated heavy duty polyethylene floor with corner drain hose Toilet roll & accessories holder Private & sheltered space while traveling Integrated towel holder 2x general wall hooks Can be used with or without roll out roof Waterproof & UV protected 850GSM heavy duty PVC zippable storage bagBatch-No. Tip: Note: The awning bag is weather-resistant, not waterproof. Please check regularly to ensure no water has collected inside the bag.ARB only accept eventual warranty claims only in conjuction with regarding Batch No wich is placed on the shipping box. Usually the box will not be kept and the number gets lost. To avoid any further troubles we highly recommend to note the number on the small patch located on one of the outer corners of the awning wich is labelled with Batch-No.

Designed to function as a fully enclosed room or mosquito net, the new ARB Deluxe awning room with floor provides protection from the weather, insects and provides additional privacy. Easy and quick to set up the ARB Deluxe awning room can be used with 2000mm model awnings and features a durable waterproof floor and its own separate ceiling to help keep you cooler.All main wall panels incorporate zipper operated two way solid and mesh access and to accommodate changing weather conditions. Features: Rear wall can be unzipped to provide access to the vehicle rear door or canopy side window Mesh pocket removable ladder organiser Two zippered ports located in the top corners for power cable access Power cord guides in roof corners keep cables and wires tidy and safe Can accommodate awning heights from 1.9m to 2.1m from ground level Cross flow ventilated mesh roof Fine midge-proof mesh side panels Heavy duty polyethylene waterproof floor Nylon stuff sack, 2 guy ropes and 6 pegs included Weight: 8kg

The Hitch Step for the 2" mount provides easier access to roof racks, roof tents and loading areas and is a practical addition for vehicles with a high roof vehicles. It is inserted directly into the mount and provides a stable, non-slip standing surface. Made from robust nylon polymer, the step can withstand loads of up to 300 kg. In addition to its practical function, it can also be used as a comfortable seat for a short break.

Featutres: Highly water-resistant "Sure Grip" buckles (no zipper to content with) Shoulder strap Capacity: 110 l Dimensions: 90 x 40 x 28cm

Features: Highly water-resistant "Sure Grip" buckles (no zipper to contend with) Shoulder strap Capacity: 50 l Dimensions: 59 x 32 cm (LxB)

Suits Hilift and ARB Jack

Engineered to handle over 100kg, the Dragmat V2 glides over your tub liner, giving you fast, frustration-free acess to gear that normally requires climbing into the tray. Built from impact-resistant HDPE with a non-slip top surface. Paired with tough Aluminium grab handles, access is always quick, easy and comfortable.Features: Easily slide weights over 100kg (max weight limit up to 250kg) Formed fit to vehicle to maximize usable space and limit unwanted movement No drilling or fastening required Non-slip top surface Light weight design (8kg)

Fits also Facelift models 2015 - 09/2020 and Models 2018 - 09/2020.Compatibility on AdBlue models is not confirmed.

Fits also Facelift models 2015 - 09/2020 and Models 2018 - 09/2020.Compatibility on AdBlue Models is not confirmed.

The Bushranger Mud Tamer Floor Mats are designed with deep edges to capture all the debris that is brought into the vehicle, from sand, dirt, mud, snow, even water can be contained within the mats. Made from a solid rubber construction that retains integrity and shape and easy to clean. A high perimeter ridge to keep debris enclosed from your interior material. The underside of mat features pips to prevent mat slippage. Generous size, they can also be trimmed to suit your foot well.

The Bushranger Mud Tamer Floor Mats are designed with deep edges to capture all the debris that is brought into the vehicle, from sand, dirt, mud, snow, even water can be contained within the mats. Made from a solid rubber construction that retains integrity and shape and easy to clean. A high perimeter ridge to keep debris enclosed from your interior material. The underside of mat features pips to prevent mat slippage. Generous in size, they can also be trimmed for a superior custom fit for your vehicle footwell.

Kit contains: Mounting bracket (3 positions) Screwkit 2x 90° Elbow Adapter 2-0740104 1x Adapter 1/4NPT to (M) JIC-04(M) (2-0740101) 1x US STD Quick Connector with 1/4 NPT thread 2-0740111

Use this hose to deliver air from your Compressor throughout your vehicle.

Air Tank 2-171507 is highly recommended

The brushless motors of the new ARB compressors deliver up to 50% more power compared to the previous ARB compressors.The brushless technology means that the compressors require less maintenance, as there are no components that are vulnerable to wear. Electronically controlled fans ensure that the operating temperature of the compressor remains optimal by continuing to run even when the compressor is no longer in use.The system also offers protection against voltage peaks, drops or fluctuations and against overcurrent. Integrated live diagnostics provide acoustic and visual warnings to detect problems early on.

The addition of a durable weather-proof case will provide protection for the compressor in various weather conditions, making it more versatile and reliable for outdoor use.The inclusion of the V2 air hose and quick connect tire inflation chuck is a convenient addition to the kit. These new accessories, along with the neoprene pocket for storage, make the overall user experience more organized and user-friendly.Kit contains: Air Compressor Durable weather-proof carry case Air hose with US standard fittings, 7m (23) in length and rated to 150psi (10bar) 1x Quick-connect ARB Tyre Inflation Chuck 1x tyre bread seating fitting 1x Inflation accessory kitFeatures: Hard anodised cylinder bore and teflon impregnated carbon fiber piston seal Built-In over pressure safety valve Motor Internally thermal procteted Built-In pressure switch Handy neoprene pocket to store hose and accessories Weather proof polypropylene storage case 50% Duty cycle